100BASE-T1 SPY 12 Port
User Manual
51
•
BRSPY 2 will act as Slave in Gigabit Port C, sending Request Messages to the
Grand Master, and as Bridge in Gigabit Port D, acting in this case in a similar
way that a Master, but sending its corrected clock to BRSPY 3. Both devices
will use the corrected clock as Timestamp.
•
BRSPY 3 will act as Slave in Gigabit Port C, sending Request Messages to the
Bridge (BRSPY 2 Gigabit D).
If the Core 802.1AS is not activated in Spy Multiplexer settings label, all the devices
will use their internal clocks, without synchronization between them.
Note:
The Timestamp used by each device will have a resolution of 0.04
μs
, following
the described information in section 4. This means, the 100Base-T1_SPY Timestamp
doesn’t match with the 802.1AS Timestamp format.
