100BASE-T1 SPY 12 Port
User Manual
17
3.4
Switch Status Tab
Figure 3-5: Details in the Switch Status Tab
The main configuration of the switch is done in the „Switch Status“ tab.
Here the user can configure details about each port and get some status information
about the ports and switch states.
On the left side of the page the user can see an overview of all available ports. A blue
bar at the side of a Gigabit or a 100Base-T1 port label indicates an active link.
Note:
There is no link status information about CAN, LIN or FlexRay ports on the
Website.
Note:
In firmware 2.0 there are only three CAN-Ports available (CAN-A to CAN-C) due
to perfomance. CAN-D and CAN-E can be activated by another Firmware, but then there
is 100BASE-T1 functionallity not avaliable anymore. For further inforamtion please
contact
If the user clicks
on „Switch Status“ tab and no port or switch is still selected,
Global
configuration
will appear.
