manualshive.com logo in svg

TEC FS-2700, Owner'S Manual

Share
Download
TEC FS-2700 Owner'S Manual Download Page 84

Guest Check Functions 

FS-2700 Owner’s Manual 

3-42  

Item Discount 

An item discount is one programmed to one item or one category.  It 

is entered on a check immediately following the item. 

1.  Enter the item to the check. 

2. Press 

the 

{DISCOUNT}

 key wanted or index the Discount I.D. 

number wanted and press 

{DISCOUNT~NLU}

. 

3.  If prompted, index a manager I.D. and press 

{TOTAL}

. 

4.  If prompted, index the amount for the discount and press 

{TOTAL}

. 

5.  Continue entering items to the check. 

 

Subtotal Discount 

A subtotal discount is one programmed to adjust all discountable 

items on the check. 

1.  Enter item(s) to the check. 

2. Press 

the 

{DISCOUNT}

 key wanted or index the Discount I.D. 

number wanted and press 

{DISCOUNT~NLU}

. 

3.  If prompted, index a manager I.D. and press 

{TOTAL}

. 

4.  If prompted, index the amount for the discount and press 

{TOTAL}

. 

5.  End the service round by pressing 

{TOTAL}

, 

{MEDIA}

 or 

{PRINT~CHECK}

. 

 

Summary of Contents for FS-2700





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands