manualshive.com logo in svg

TEC FS-2700, Owner'S Manual

Share
Download
TEC FS-2700 Owner'S Manual Download Page 121

FS-2700 Owner’s Manual 

Reports 

 5-11 

5.3  Hourly Productivity Report 

System 

Revenue 

Center 

Station User 

 

The Hourly Productivity Report provides a sales breakdown by times 

of day.  Subtotals are provided by Meal Period. 

---------------------------------------- 
  10:00 am                         7/17/03 
         HOURLY PRODUCTIVITY REPORT        
               SYSTEM REPORT               
                   Daily                   
   FROM  7/17/03  8:00 TO  7/17/03 10:00   
         TEC America - Atlanta, GA         
  ---------------------------------------- 
  



          



    

‘

    

’

  

 

 

  08-09             7    32.43   19.10%    
     :30            3    15.19   46.84%    
     :60            4    17.24   53.16%    
 
  09-10            13   109.83   64.68%    
     :30            5    37.29   33.95%    
     :60            8    72.54   66.05%    
 
  Breakfast        20   142.26   83.78%   

Total for the Meal Period 

  10-11             2    27.55   16.22%    
     :30            2    27.55  100.00%    
     :60            0     0.00    0.00%    
 
  Lunch             2    27.55   16.22%    
 
 
  Total            22   169.81             
 



  

Time Periods

 –determined by OPEN and CLOSE options in 

System Setup/System Config table.  If any sales are outside 

those business hours, the report hours are adjusted to included 
all sales. 

• 

Time Intervals 

– set by option HOUR PART in System 

Setup/System Config table.  Options are for whole, half or 

quarter hours.  

Summary of Contents for FS-2700





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands