TEC FS-2700 Owner'S Manual Download Page 123

Page: 123 / 148

FS-2700 Owner’s Manual

Reports

5-13

5.4 Sales

Mix

Report

System

Revenue

Center

Station User

This report selection has three options:

1. Detail

Shows detailed information for each
menu item being tracked and that was

sold for the period. The Track System

flag in the Menu Setup table determines

whether the item is detailed in the report.

2. Departments

A summary by Departments of Menu

Items sold for the period.

3. Categories

A summary by Category of Menu Items

sold for the period.

Report Items

Item/Department/Category Line -

This line contains the record

number of the Menu Item, Department or Category, and the

item’s name. The Menu Item report includes the average selling

price of the total number of items sold.

# Sold

- The number of the Menu Item sold, and the number sold as

a percent of total items sold for the period.

Gross Revenue

- The amount of revenues generated by selling the

Menu Item, and the revenues for the Menu Item as a percent of

total.

Item Discounts

– The dollar amount that was discounted from

specific items and the percentage of the total revenue from this

Menu Item that was discounted.

Discounts

– This total is only on the report summary. The total

dollar amount of discounts that were applied to check subtotals.

Net Sales

– Total of the selling prices of this menu item, adjusted for

Item discounts.

Summary of Contents for FS-2700





















































































































































Search results

Summary of Contents for FS-2700

Reviews:

Brands by name

Popular brands

TEC FS-2700, Owner'S Manual

Search results

Summary of Contents for FS-2700

Reviews:

Brands by name

Popular brands