manualshive.com logo in svg

TEC FS-2700, Owner'S Manual

Share
Download
TEC FS-2700 Owner'S Manual Download Page 70

Guest Check Functions 

FS-2700 Owner’s Manual 

3-28  

3.6.4  Using a Bar Code Scanner 

If the workstation is connected to a bar code scanner and bar codes 
are being printed on the guest checks, scan the guest check. 

 

3.6.5  Recall with Dual Drive Thru 

A Dual-Drive Thru application uses two options: 

 

The MONITOR STATION field in the Station Setup table enables 

a workstation’s orders of a certain Order Type to be recalled at 

another specific station. 

• 

Example:  Drive Thru Order Taker #1 can forward orders to 
Drive-Thru Cashier #1.  Drive Thru Order Taker #2 can 

forward orders to Drive Thru Cashier #2. 

 

The 

{RECALL~OT#}

 key type which is used to recall checks of a 

specific order type. 

Example 

1.  Order is entered at Drive Thru Order Taker Station. 

2.  Cashier at Drive Thru Cashier Station presses 

{RECALL~OT}

 key 

programmed for an Order Type named DRIVE THRU. 

3.  Orders display on Drive Thru Cashier Station in the order they 

were entered.  First order is in upper left corner of window. 

Summary of Contents for FS-2700





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands