manualshive.com logo in svg

TEC FS-2700, Owner'S Manual

Share
Download
TEC FS-2700 Owner'S Manual Download Page 61

FS-2700 Owner’s Manual 

Guest Check Functions 

 3-19 

3.3.10 Remove Items from Checks 

Remove Last Item 

1.  Enter menu items. 

2. Press 

{LAST~ITEM~VOID}

. 

3.  The last menu item entered on the check is removed. 

 

Remove One Item 

 

Before an item has been sent/stored, the security level in the 

Function Setup table only applies if the option SEC EC VOID in 
the System Config. table is set (page 10 #1). 

 

After a menu item has been sent/stored and the check recalled, 
the 

{VOID}

 key can only be used according to the security level 

set in the Function Setup table. 

Procedure 

1.  Enter menu items. 

2. Press 

{VOID}

. 

3.  If prompted, index a Manager Code and press 

{TOTAL}

. 

4.  Use the up and down arrow keys to highlight the item to be 

removed from the check. 

• 

Highlighting a primary Menu Item automatically highlights the 

item’s modifiers. 

5. Press 

{VOID}

.  The item is removed from the check. 

 

Summary of Contents for FS-2700





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands