manualshive.com logo in svg

TEC FS-2700, Owner'S Manual

Share
Download
TEC FS-2700 Owner'S Manual Download Page 47

FS-2700 Owner’s Manual 

Guest Check Functions 

 3-5 

3.2.2 Guest Count 

 

A guest count can be required for the Order Type by the REQ 
GUEST CNT flag in the Order Type table.  The Order Type is 

determined by the Job Code of the User logged in. 

• 

This setting requires a number of guest entry before the 
check is sent. 

• 

An additional setting, PROMPT # GUEST in the Station 
Setup table, can require a guest count entry before a menu 

item is entered. 

 

A default entry can be assigned to an Order Type using the 
DEFAULT GUEST COUNT flag in the Order Type table, so the 

server does not have to make an entry. 

 

This key type does not apply if the workstation is set up to track 

check cover by Meal Count rather than Guest Count.  That 

option is GUEST CNT in the Station Setup table.  

 

Procedure 

1.  Index the number in the party for this guest check. 

2. Press 

{GUESTS}

. 

OR 

1. Press 

{GUESTS}

. 

2. Screen 

prompts: 

Enter guest count 

3.  Index the number in party and press 

{TOTAL}

. 

• 

To accept the default guest count, press 

{TOTAL}

 without 

entering a number first. 

Summary of Contents for FS-2700





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands