manualshive.com logo in svg

TEC FS-2700, Owner'S Manual

Share
Download
TEC FS-2700 Owner'S Manual Download Page 137

FS-2700 Owner’s Manual 

Reports 

 5-27 

5.10 Loan/Pickup Report 

System 

Revenue 

Center 

Station User 

 

This report is a log of the bank loans and pick-ups that occurred on 

the system.  The Net amount of this report is included in the CASH 

amount on the Financial and Media Reports. 

---------------------------------------- 
 4:55 pm                         7/14/03 
           LOAN/PICKUP REPORT            
             SYSTEM REPORT               
                 Daily                   
 FROM  7/14/03  0:00 TO  7/14/03 16:55   
       TEC America - Atlanta, GA         
---------------------------------------- 
 
Mary #6                                  

Server Name and User I.D. 

 
DESCRIPTION    TIME STN          AMOUNT  
 
Loan          16:42   1           25.00  
Loan Total                        25.00  
 
Pickup Total                       0.00- 
 
Total                             25.00  
 

Loan Total                        50.00  
Pickup Total                     153.00- 
Total                            103.00- 

The net amount of all Loans (+) and Pickups (-) 

USER ID

 – The name and user ID of the operator who received the 

Loans or Pick-Ups.  This report prints a record for each em-

ployee who received a Loan or Pick-up. 

TIME

 - The time of the loan or pick-up. 

STN

 - The station ID where the loan or pick-up occurred. 

AMOUNT

 - This is the amount of the loan or pick-up. 

Summary of Contents for FS-2700





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands