manualshive.com logo in svg

TEC FS-2700, Owner'S Manual

Share
Download
TEC FS-2700 Owner'S Manual Download Page 129

FS-2700 Owner’s Manual 

Reports 

 5-19 

5.7 Financial 

Report 

System

 

Revenue 

Center

 

Station

 

User

 

 

---------------------------------------- 
 4:20 pm                         7/14/03 
            FINANCIAL REPORT             
             SYSTEM REPORT               
                 Daily                   
 FROM  7/14/03  0:00 TO  7/14/03 16:20   
       TEC America - Atlanta, GA         
---------------------------------------- 
 

Readings -

 Non-resettable totals maintained by each POS station.  

This section prints if the USE NRGT option in System Setup/ 

System Config is set.  These fields do not appear on the User 

Financial Report. 

 

Readings  

 Opening                    0.00         
 Closing                   69.14         

Menu Item Sales before Voids, Refunds or Discounts 

+ Tax and Tips 

 

 Trn Opening                0.00         
 Trn Closing                0.00         

Readings for Training Totals. 

 

Sales

 - Sales totals by Departments, sales tax collected, and sales 

totals and statistics by order type. 

 

Sales   

 
 FOOD                      38.44         
 BEVERAGE                   6.50         
 Sales Tax                  2.97         
                       ---------         
 Gross Sales               47.91         
 
 Sales Tax                  2.97-        
                       ---------         
 Net Sales                 44.94         

Net Sales = Menu Item Sales – Voids/R/- Discounts 

Summary of Contents for FS-2700





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands