manualshive.com logo in svg

TEC FS-2700, Owner'S Manual

Share
Download
TEC FS-2700 Owner'S Manual Download Page 119

FS-2700 Owner’s Manual 

Reports 

 5-9 

5.1.4  Report Sample Formats 

The following pages show details of each report option. 

• 

The block beneath each report title indicates if the report is 

included in System, Revenue, Station or User totals. 

• 

The reports shown are samples and do not all balance with 
each other. 

• 

Any extra notes included for a particular line is right justified 
close to that line in the report. 

• 

A wavy line in the middle of a report indicates that part of it 
was “cut out” so a total could be included on the same page. 

 

 

Report Headers 

---------------------------------------- 
 4:20 pm                         7/14/03 

The time & date the report was taken. 

 

            FINANCIAL REPORT             
             SYSTEM REPORT               
                 Daily                   

The report Name, Type and Period. 

 

 FROM  7/14/03  0:00 TO  7/14/03 16:20   

The time period that the report covers. 

 

       TEC America - Atlanta, GA         

Store name and location, from 

System Setup/System Config page 1. 

---------------------------------------- 

 

Summary of Contents for FS-2700





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands