manualshive.com logo in svg

TEC FS-2700, Owner'S Manual

Share
Download
TEC FS-2700 Owner'S Manual Download Page 46

Guest Check Functions 

FS-2700 Owner’s Manual 

3-4  

3.2  New Check Prompts 

All checks are tracked by a system-assigned check number.  In 

addition, other check information can be required and attached to the 

check.  These options are table number, number of guests, and an 

order/tent number. 

3.2.1 Table Number 

 

A table number can be required for the Order Type by the REQ 

TABLE flag in the Order Type table.  The Order Type of the 

check is determined by the Job Code of the User logged in. 

• 

This setting requires a table number entry before the check 
is sent. 

∗ 

Table number entry is not required if immediately paying 

out the check. 

 

An additional setting, PROMPT TABLE in the Station Setup 

table, can require a table number entry before a menu item is 

entered.   

∗ 

With this option set, the table number entry 

is

 required if 

immediately paying out the check. 

 

When a table number is assigned to a check, it can be recalled 

by table number as well as the check number. 

Procedure 

1.  Index the table number for this order. 

• 

Press 

{TABLE~#}

. 

 

Summary of Contents for FS-2700





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands