TBK vision TBK-NVR2100 Series User Manual Download Page 108

Page: 108 / 161

TBK-NVR2100 Network Video Recorder User Manual V2

www.tbkvision.com

108

Sends an exception or alarm signal to remote alarm host when an event occurs. The

alarm host refers to the PC installed with Remote Client.

The alarm signal will be transmitted automatically at detection mode when remote

alarm host is configured. Please refer to

Chapter 11.2.6

Configuring More Settings for

details of alarm host configuration.

Email Linkage

Send an email with alarm information to a user or users when an alarm is detected.

Please refer to

Chapter

9.2.5

for details of Email configuration.

Trigger Alarm Output

Trigger an alarm output when an alarm is triggered.

Go to

Menu

Configuration

Alarm

Alarm Output

Select an alarm output and set alarm name and dwell time. Click

Schedule

set the arming schedule of alarm output.

If “Manually Clear” is selected in the dropdown list of Dwell Time, you can clear it

only by going to

Menu

Manual

Alarm

Set up arming schedule of the alarm output.

Choose one day of a week and up to 8 time periods can be set within each day.

Time periods shall not be repeated or overlapped.

Alarm Output Setup Interface

Summary of Contents for TBK-NVR2100 Series


































































































































































Search results

Summary of Contents for TBK-NVR2100 Series

Reviews:

Related manuals for TBK-NVR2100 Series

Brands by name

Popular brands

TBK vision TBK-NVR2100 Series, User Manual

Search results

Summary of Contents for TBK-NVR2100 Series

Reviews:

Related manuals for TBK-NVR2100 Series

Brands by name

Popular brands