TBK vision TBK-NVR2100 Series User Manual Download

Page: 107 / 161

TBK-NVR2100 Network Video Recorder User Manual V2

www.tbkvision.com

107

Check

Enable Event Hint

Click the

button to finish settings.

Full Screen Monitoring

When an alarm is triggered, the local monitor (VGA and HDMI

monitor) display in

full screen the video image from the alarming channel configured for full screen
monitoring.

If alarms are triggered simultaneously in several channels, their full-screen images will

be switched at an interval of 10 seconds (default dwell time). A different dwell time
can be set by going to Menu >Configuration>Live View > Full Screen Monitoring Dwell
Time.

Auto-switch will terminate once the alarm stops and you will be taken back to the

Live View interface.

You must select during “Trigger Channel” settings the channel(s) you want to make

full screen monitoring.

Audible Warning

Trigger an audible

beep

when an alarm is detected.

Notify Surveillance Center

Event Hint Settings Interface

Click the

to set the type of event to be displayed on the image.

Event Hint Settings Interface

Summary of Contents for TBK-NVR2100 Series


































































































































































Search results

Summary of Contents for TBK-NVR2100 Series

Reviews:

Related manuals for TBK-NVR2100 Series

Brands by name

Popular brands

TBK vision TBK-NVR2100 Series, User Manual

Search results

Summary of Contents for TBK-NVR2100 Series

Reviews:

Related manuals for TBK-NVR2100 Series

Brands by name

Popular brands