TBK vision TBK-NVR2100 Series User Manual Download Page 71

Page: 71 / 161

TBK-NVR2100 Network Video Recorder User Manual V2

www.tbkvision.com

Set the HDD property to

Read-only

Click

to save settings and back to the upper level menu.

⚫

You cannot save any files in a Read-only HDD. If you want to save files in the
HDD, change the property to R/W.

⚫

If there is only one HDD and is set to Read-only, the NVR can’t record any
files. Only live view mode is available.

⚫

If you set the HDD to Read-only when the NVR is saving files in it, then the file
will be saved in next R/W HDD. If there is only one HDD, the recording will be
stopped.

HDD General

Editing

Summary of Contents for TBK-NVR2100 Series


































































































































































Search results

Summary of Contents for TBK-NVR2100 Series

Reviews:

Related manuals for TBK-NVR2100 Series

Brands by name

Popular brands

TBK vision TBK-NVR2100 Series, User Manual

Search results

Summary of Contents for TBK-NVR2100 Series

Reviews:

Related manuals for TBK-NVR2100 Series

Brands by name

Popular brands