TBK-NVR2100 Network Video Recorder User Manual V2
159
2)
Open the Super Terminal, and execute the command of “
ping
192.168.0.0
–
l 1472 –f
”
(the IP address may change according to the real condition), and
check if there exists packet loss.
Simultaneously press the
Ctrl
and
C
to exit the ping command.
Verify the frame rate is real-time frame rate.
Select “Menu > Record > Parameters > Record”, and set the Frame Rate to “Full
Frame”.
Verify the hardware can afford the playback.
Reduce the channel number of playback.
Select “Menu > Record > Encoding > Record”, and set the resolution and bitrate
to a lower level.
Reduce the number of local playback channel.
Select “Menu > Playback”, and uncheck the checkbox of unnecessary channels.
Check if the fault is solved by the above steps.
If it is solved, finish the process.
If not, please contact the engineer from our company to do the further
process.
No record file found in the NVR local HDD, and prompt “No record file found”.
Possible Reasons:
a)
The time setting of system is incorrect.
b)
The search condition is incorrect.
c)
The HDD is error or not detected.
Verify the system time setting is correct.
Select “Menu > Configuration > General > General”, and verify the “Device
Time” is correct.
Verify the search condition is correct.
Select “Playback”, and verify the channel and time are correct.
Verify the HDD status is normal.
