TBK vision TBK-NVR2100 Series User Manual Download Page 133

Page: 133 / 161

TBK-NVR2100 Network Video Recorder User Manual V2

www.tbkvision.com

133

Chapter 11 Camera Settings

Configuring OSD Settings

Purpose:

You can configure the OSD (On-screen Display) settings for the camera, including date

/time, camera name, etc.

GO to

Menu

Camera

OSD

Select the camera to configure OSD settings.

Edit the Camera Name in the text field.

Configure the Display Name, Display Date and Display Week by clicking the
checkbox.

Select the Date Format, Time Format and Display Mode.

You can use the mouse to click and drag the text frame on the preview window to
adjust the OSD position.

Click

Apply

to apply the settings.

Configuring Privacy Mask

Purpose:

You are allowed to configure the four-sided privacy mask zones that cannot be

viewed by the operator. The privacy mask can prevent certain surveillance areas to
be viewed or recorded.

Go to

Menu

Camera

Privacy Mask

Select the camera to set privacy mask.

OSD Configuration Interface

Summary of Contents for TBK-NVR2100 Series


































































































































































Search results

Summary of Contents for TBK-NVR2100 Series

Reviews:

Related manuals for TBK-NVR2100 Series

Brands by name

Popular brands

TBK vision TBK-NVR2100 Series, User Manual

Search results

Summary of Contents for TBK-NVR2100 Series

Reviews:

Related manuals for TBK-NVR2100 Series

Brands by name

Popular brands