TBK vision TBK-NVR2100 Series User Manual Download

Page: 9 / 161

TBK-NVR2100 Network Video Recorder User Manual V2

www.tbkvision.com

⚫

Remote viewing of the device status, system logs and alarm status.

⚫

Remote keyboard operation.

⚫

Remote locking and unlocking of control panel and mouse.

⚫

Remote HDD formatting and program upgrading.

⚫

Remote system restart and shutdown.

⚫

Alarm and exception information can be sent to the remote host

⚫

Remotely start/stop recording.

⚫

Remotely start/stop alarm output.

⚫

Remote PTZ control (depending on models).

⚫

Remote JPEG capture.

⚫

Two-way audio and voice broadcasting.

⚫

Embedded WEB server.

⚫

Upgrade by FTP server.

Development Scalability:

⚫

SDK for Windows and Linux system.

⚫

Source code of application software for demo.

⚫

Development support and training for application system.

Summary of Contents for TBK-NVR2100 Series


































































































































































Search results

Summary of Contents for TBK-NVR2100 Series

Reviews:

Related manuals for TBK-NVR2100 Series

Brands by name

Popular brands

TBK vision TBK-NVR2100 Series, User Manual

Search results

Summary of Contents for TBK-NVR2100 Series

Reviews:

Related manuals for TBK-NVR2100 Series

Brands by name

Popular brands