TBK vision TBK-NVR2100 Series User Manual Download

Page: 7 / 161

TBK-NVR2100 Network Video Recorder User Manual V2

www.tbkvision.com

⚫

Supports S.M.A.R.T. and bad sector detection.

⚫

HDD quota management; different capacity can be assigned to different
channel.

Recording and Playback

⚫

Holiday recording schedule configuration.

Continuous and event video recording parameters.

Multiple recording types: manual, continuous, alarm, motion, motion | alarm,

motion & alarm.

⚫

8 recording time periods with separated recording types each day.

⚫

Pre-record and post-record for alarm, motion detection for recording, and
prerecord time for schedule and manual recording.

⚫

Searching record files by events (alarm input/motion detection/VCA).

⚫

Playback by sub-periods.

⚫

Tag adding for record files, searching and playing back by tags.

⚫

Locking and unlocking record files.

⚫

Local redundant recording.

⚫

Provides new playback interface with easy and flexible operation.

⚫

Searching and playing back record files by camera No., recording type, start
time, end time, etc.

⚫

Smart search for the selected area in the video.

⚫

Zooming in when playback.

⚫

Reverse playback of multi-channel.

⚫

Supports pause, play reverse, speed up, speed down, skip forward, and skip
backward when playback, and locating by dragging the mouse.

⚫

Supports thumbnails view and fast view during playback.

⚫

Supports playback by transcoded stream.

⚫

Up to 4/8-ch synchronous playback.

Backup

⚫

Export video data by USB or SATA device.

⚫

Export video clips when playback.

Summary of Contents for TBK-NVR2100 Series


































































































































































Search results

Summary of Contents for TBK-NVR2100 Series

Reviews:

Related manuals for TBK-NVR2100 Series

Brands by name

Popular brands

TBK vision TBK-NVR2100 Series, User Manual

Search results

Summary of Contents for TBK-NVR2100 Series

Reviews:

Related manuals for TBK-NVR2100 Series

Brands by name

Popular brands