TBK-NVR2100 Network Video Recorder User Manual V2
50
Use the directional button to wheel the camera to the location where you want to
set the limit, and click the
Left Limit
or
Right Limit
button to link the location to
the corresponding limit.
The speed dome starts linear scan from the left limit to the right limit, and you must
set the left limit on the left side of the right limit, as well the angle from the left limit
to the right limit should be no more than 180º.
Calling Linear Scan
Before operating this function, make sure the connected camera supports the linear
scan and is in HIKVISION protocol.
Purpose:
Follow the procedure to call the linear scan in the predefined scan range.
Click
PTZ
in the lower-right corner of the PTZ setting interface;
Or press the PTZ button on the front panel or click the PTZ Control icon
in
the quick setting bar to enter the PTZ setting menu in live view mode.
Click the button to show the one-touch function of the PTZ control.
PTZ
Settings
