TAYO Zontes ZT125-M 2022, Maintenance Manual

Page: 40 / 188

40 / 188
4. Remove the air filter housing
a. Use a Phillips screwdriver to remove the 9 pcs screws
that fix the housing of the air filter.
b. Remove the air filter housing.
5. Replace Air filter element
a. Use a Phillips screwdriver to remove the 6 screws that
fix the filter element that comes with the air filter.
b. Remove the old air filter element. Blow the dust inside
the air inlet pipe with a dust blower, and then wipe the inner
wall with a clean non-woven cloth.
c. Replace the new filter element and sealing strip.
6. Inspection air filter waste oil pipe
Wipe clean the surface of the waste oil pipe and visually
check for liquid. If so, use pliers to remove the waste oil pipe
clamp, clean the waste oil pipe, and then reinstall it. Pay
attention to increase the frequency of inspection
appropriately when the air humidity is high.
7. Reinstall
a. Refer to the steps of removing the filter housing to
install the housing back.
b. Replace the air inlet baffle and the air inlet cover of the
replaced air inlet filter element.
c. Clip M6×14 bolt to the inner step hole of the engine left
cover, and then use a 4# inner hexagon to penetrate from
the outside and hold the bolt
.
d. Align the left bolt with the mounting hole and tighten it.
e. Use 4# inner hexagon to install the other 4 M6×14 bolts.
Replace the decorative buckle.