180
/
188
storage box panel in the order of the small arrows. The
connection of the middle and left pedal decoration cover
(yellow area: 7 buckles on the front storage box panel, 3
buckles on the left pedal decoration cover; blue area:
surrounds the 4 points where the middle part is connected to
the front storage box panel The 10 buckles of the bayonet)
and the 4 bayonets are separated, and then remove the left
decorative cover of the front storage box panel, remove the
left decorative cover of the front storage box panel.
Use the same method to remove the right decorative
cover of the front storage box panel.
Disassembly of the left &right side cover
a. Put down the left rear pedal and use the 4# inner
hexagon to remove the M6
×
14 bolt. Pull out in sequence in
the direction of the arrow (from the rear wheel to the front
wheel). Note that there are 5 staples at the red circle and a
circle of buckles around. It takes a lot of force to pull out.
b. Remove the right side cover by the same method.
Disassembly of the foot pedals and trim
cover
a. Protrude the rear pedal rubber pad and rear pedal
rubber pad pressure plate from the position indicated by the
small arrow with the Slot-type Screwdrivers. Pull the rear
pedal rubber pad and rear pedal rubber pad pressure plate
upward in the direction of the big arrow until the rear pedal
rubber pad and rear pedal rubber pad pressure plate are
removed.
Caution:
Use a tool such as non-woven cloth to
wrap the Slot-type Screwdrivers when using it to prevent
scratches on the paint surface.
b. Remove 7 pcs M6x14 bolts on the left pedal with 4#
inner hexagon. Remove a M6x16 bolt with 5# inner hexagon
and then take off the bushing on the front part.
c. Remove the two M6x14 bolts of the in side of left pedal
decorative cover front part with 4# inner hexagon.
d. Remove an M6x14 bolt from the bottom plate and the
decorative cover of the left pedal with a 4# inner hexagon;
then remove the 1 swell nail of the left pedal decorative
cover and 1 swell nails of the bottom plate
e. Hold the left pedal decorative cover and the left pedal
with two hands and take out the left pedal decorative cover
and the left pedal in the direction of the arrow.
Summary of Contents for Zontes ZT125-M 2022
