TAYO Zontes ZT125-M 2022, Maintenance Manual

Page: 44 / 188

44 / 188
spark plug, you can turn it by hand until there is resistance
and then rotate it 1/2 turn. For example, if you use an old
spark plug, you can turn it to the standard torque as soon as
possible.
●Pay attention and order when removing the plastic buckle
to avoid the buckle from breaking.
M125 Spark plug
Caution:
●Before disassembling, blow off the dust near the spark plug
with a dust blower.
●After removing the spark plug, prevent foreign objects from
falling into the engine.
1. Disassemble the spark plug
a. Put down the right rear pedal and use the 4# inner
hexagon to remove the M6
×
14 bolt.
b. Pull out in sequence in the direction of the arrow (from
the rear wheel to the front wheel). Note that there are 5
staples at the red circle and a circle of buckles around. It
takes a lot of force to pull out.
c. Use your fingers or a plastic crowbar to insert the arrow
indication point, first pry the arrow indication point open the
gap and then pull up.
d. Respectively use 4# inner hexagon to remove the 2 M6
×
12 bolts at the front pedal.
e. Use 4# inner hexagon to remove the 3 M6
×
14 bolts
that surround the right side.
f. Use your fingers or a plastic crowbar to forcefully break
out from the arrow point until the bolt near the arrow point
is exposed. Because there are still bolts on the upper part
that have not been removed, it cannot be removed directly.
g. Use 5# inner hexagon to remove the M6
×
16 bolt,
remove bushing.
h. Use 4# inner hexagon to remove 7 pcs M6
×
14 bolts.
i. Use 4# inner hexagon to press down the center
cylindrical pins of the 3 swell nails on the right, and then
remove the swell nails. Remove the M6
×
14 bolt on the right