TAYO Zontes ZT125-M 2022, Maintenance Manual

Page: 177 / 188

177 / 188
b. Hold the headlight with one hand and take it out for a
certain distance, pull out the 3P plug (green and white wire)
behind the headlight with the other hand, and take out the
headlight completely.
Removal of front turn signal
a. Use 4# inner hexagon to remove the two M6×16 bolts
on the front left turn signal .
b. Use 4# inner hexagon to remove 1 swell nail on the top
of the front left turn signal; use a cross screw to remove 1
self-tapping nail on the top rear of the front left turn signal.
c. Take out the front left turn signal with one hand, and
unplug the 2 bullet joints of the front left turn signal with the
other hand.
d. Remove the front right turning light by the same
methods.
Disassembly of the of the Speedometer
panel
a. Remove the two M6x12 bolts from the front turning
light with a 4# socket.
b. Grasp the marked place (green rectangle) on the
Speedmeter panel with one hand and lift it up in the
direction of the big arrow. With the other hand, press the
front storage box panel at the junction of the front storage
box panel and the Speedometer panel, Until the 8 buckles
(Yellow area, 4 places on the left and right) connecting front
storage box panel and the Speedometer panel are separated
c. Grasp the Speedometer panel with one hand and lift it
up slightly in the direction of the big arrow, and pull out the
Speedometer plug () connected to the Speedometer with the
other hand.
Caution:
When pulling out the plug, you must
first press the lock buckle pointed by the arrow on the back
of the plug with your fingers, and then pull it out. Plug, do
not unplug the Speedometer plug directly; finally grasp the
two sides of the Speedometer panel, lift it in the direction of
the big arrow, and pull it out to take out the Speedometer
panel.
Removal of the front left and right panels
a. Use 4# inner hexagon to remove two M6×12 bolts and a
swell nail on the front left panel, and then pull out the
decorative glue of the front left panel by hand.