TAYO Zontes ZT125-M 2022, Maintenance Manual

Page: 135 / 188

135 / 188
c. Press the buckle indicated by the arrow to pull out the
plug of the cooling fan of the small water tank.
d. Use an 8# sleeve to remove the 3 M6×22 bolts
⑺
shown
in the figure.
e. Use an 8# sleeve to remove one M6×22 bolt
⑺
that
fixes the aluminum water inlet pipe; fix two M6×30 bolts
⑻
on the upper left side of the main water tank and the upper
right side of the small water tank.
f. First open the black rubber cover of the auxiliary water
tank, grasp the auxiliary water tank connecting water pipe
⑽
with one hand, and use the hoop clamp to remove the φ9
hoop
⑼
in the direction of the arrow, then slowly lower the
water pipe while catching the drain with the oil pan. Coolant.
Use the same method to remove the φ10.5 hoop
⑾
and then
pull out the water pipe
⑽
. Cut the cable tie
⑿
, and use an 8#
sleeve to remove the 2 M6×22 bolts
⑺
that fix the auxiliary
water tank. Remove the auxiliary water tank assembly from
the vehicle. Remove the bolts
⑺
on the right side of the main
water tank and the aluminum outlet pipe.
g. Use the hoop pliers to move the φ10.5 hoop
⑾
in the
direction of the arrow, and then pull out the leaking pipe
⒀
.
Check whether the auxiliary water tank
⒁
is damaged.
h. Use an 8# sleeve to remove the two M6×12 bolts
⒂
that
fix the water inlet.
i. Pull out the engine water inlet pipe and the small water
tank water inlet pipe, and pull out the water tank assembly
to the left. Grasp both sides of the main water tank and pull
it up in the direction of the arrow to remove the radiator
assembly from the vehicle.