TATA Motors Punch 2021, Owner'S Manual

Page: 86 / 238

78
2 Slow Wipe
Push the stalk towards position (2) for con-
tinuous slow wipe.
3 Fast Wipe
Push the stalk towards position (3) for con-
tinuous fast wipe.
4 Flick Wipe (spring return)
Pull the stalk downwards and
hold it for continuous wipe, the
wiper continuously wipes across the wind-
shield at low speed till the stalk is re-
leased.
5 Front Windshield Washer
Pull the lever little longer, to •
spray the washer fluid on
the windshield.
The windshield wipers will operate for •
three cycles after the lever is released
and for one more cycle after five sec-
onds.
Auto Front Wipe
If your vehicle is fitted with rain and light
sensor, the wipers will automatically wipe
the windscreen, if it senses rainfall. Make
sure that the wiper stalk is in Auto position.
6 Rear Wash And Wipe
Rear Windshield / Wiper And Washer
(spring return)
Turn the rotary knob clockwise
and release to operate rear
windshield wash and wipe. The wind-
shield wipers will operate for three cycles.
Rear Wipe
Turn the rotary knob counter
clockwise such that it aligns its
positions with arrow mark to operate rear
windshield wiper continuously.
Rear Windshield/ Wiper And Washer
Switch
Turn the rotary knob counter
clockwise such that it aligns its
positions with the arrow mark and hold it
to operate rear windshield wash and wipe
function. It will return to ‘Rear wipe’ posi-
tion as soon as it is released and contin-
ues to wipe.
NOTE
When you crank the engine, the supply
to washer motor is momentarily cut off.
NOTE
When you crank the engine, the supply
to washer motor is momentarily cut off.
NOTE
Rear wiper will not work as long as tail-
gate is open.
DASHBOARD AND FEATURES