manualshive.com logo in svg

TATA Motors Punch 2021, Owner'S Manual

Share
Download
TATA Motors Punch 2021 Owner'S Manual Download Page 67

Driver Information System (DIS) 

Driver Information

System Image

Description

Odometer

Indicates distance travelled by a vehicle. The Odometer reading does not re-
turn to “0” when maximum value is reached, the display will freeze to maximum 
value.

Trip meter A & B

 

The trip meter can be used to measure the distance travelled on short trips or 
between fuel stops. It can be reset to “0”. The Trip meter reading becomes 
“0.0” after it crosses 9999.9 km.

Clock

Indicates current time in AM/PM mode. Clock time can be changed using ‘SET’ 
& ‘MODE’ knob. 
Whenever the battery terminals or related fuses are connected, you must reset 
the clock time. This feature is available when ignition switch is in ON position.  

NOTE: 

Clock settings can also

 

be changed through infotainment system. For 

more information, refer infotainment manual.

Door Ajar

This warning will be indicated when the driver’s door or front passenger door 
is open.

Service reminder

 

This indicates how many days/kilometres are left till service is due. If service 
is overdue, it will display “0” km or “0” days and a spanner symbol will blink 
every time ignition is ON for a few seconds. Never reset the display between 
service intervals as it may give incorrect readings. The information is retained 
in the service interval display even after the vehicle battery is disconnected. 

NOTE: 

This option is for indicative purpose

 

only. Keep track of your odometer 

reading and follow the maintenance schedule.

DASHBOARD AND FEATURES

59

Summary of Contents for Punch 2021















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands