manualshive.com logo in svg

TATA Motors Punch 2021, Owner'S Manual

Share
Download
TATA Motors Punch 2021 Owner'S Manual Download Page 195

For 185/70 R15 Tyres 

 

With temporary spare wheel

 

For Tyre With Temporary Spare 
Wheel (if available) 

For 195/60 R16 Tyres With Temporary 
Spare Wheel 

 

 

 

Wheel Covers (if available) 

 

Insert a piece of cloth between the spokes 
of the wheel cover and pull it outwards. 

Take out detached wheel cover from the 
wheel rim. 

When installing the cover, make sure that 
it is positioned so that it does not cover the 
air filling valve. Apply equal pressure at the 
circumference of the wheel cover to fix it 
in the wheel rim. 

 

 

Wheel Balancing 

Wheels of your vehicle are balanced for 
better ride comfort and longer tyre life. Bal-
ancing needs to be done whenever tyre is 
removed from rim. 

 

 

Special Care For Tubeless Tyres 

When you remove the tyre and install 

•

 NOTE

Do not use spare wheel for tyre ro-

•

tation, in case of temporary spare 
wheel used. 

Two or more temporary tyres should 

•

not be used on one vehicle. 

Tyre pressure of temporary wheel is 

•

to be checked at least once in in a 
month.

 NOTE

Do not use any sharp tools (such as 
screw driver etc.) to remove the wheel 
cover.

 WARNING

If the vehicle vibrates abnormally on a 
smooth road, have the wheel balanced 
done immediately.

MAINTENANCE

187

Summary of Contents for Punch 2021















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands