manualshive.com logo in svg

TATA Motors Punch 2021, Owner'S Manual

Share
Download
TATA Motors Punch 2021 Owner'S Manual Download Page 142

134

Working 

Starting the vehicle initially will be by con-
ventional method (key start or push button 
start). When the vehicle is stationary and 
engine is idle (in a traffic light, traffic jam, 
toll gate, etc.) it will turn-off automatically. 
When the clutch pedal is pressed, the en-
gine will restart automatically. Engine may 
also restart automatically without Clutch 
pedal press due to other preconditions 
which are captured below. 

Sequence Of Functions 

Vehicle started through Ignition key or 

1.

Push button switch. 

Vehicle is in standstill and Engine is 

2.

running. 

Vehicle moves forward and exceeds 

3.

speed threshold values. 

When vehicle is to be stopped (sce-

4.

nario: Red signal), press the brake and 
then, press the clutch. The vehicle 
comes to a halt. Shift the gear to neu-
tral and release the clutch. Engine will 
be automatically stopped. 

When you want to move (Scenario: 

5.

Green signal), Press Clutch pedal to 
start. 

Engine will automatically start when 

6.

Clutch is pressed fully. 

This system enables the ISS functions au-
tomatically when Ignition is turned ON. If 
you do not want to use this feature, you 
can switch it off by pressing the ISS OFF 
switch provided in the vehicle. 

 

Following Conditions Will Prevent Iss 
Function Standby / Not Enabled 

Engine hood (bonnet) is open 

•

Reverse Gear is engaged. 

•

Outside temperature is too low or too 

•

high 

Battery system is unhealthy 

•

Engine coolant temperature is too low 

•

Driver presence is not detected (Seat 

•

belt is not fastened) 

Driver door is open 

•

Any system fault 

•

Warning light will be displayed on the in-
strument cluster to indicate the heathy sta-
tus of this function. 

Special Feature Of Automatic Restart 

This system is equipped with a special fea-
ture of Automatic Restart. Under certain 
conditions, the Engine will automatically 
restart on its own in order to meet your 
Safety and Comfort requirements. 

This can occur especially when the vehicle 
is standstill and following conditions oc-
curred, 

Battery is being discharged too low. 

•

Vehicle started rolling forwards/ back-

•

wards 

Brake has been pressed repeatedly for 

•

several times/brake Pressure too low 

When the Cabin temperature is too 

•

hot/too cold 

Defrost button is pressed 

•

STARTING AND DRIVING

Summary of Contents for Punch 2021















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands