manualshive.com logo in svg

TATA Motors Punch 2021, Owner'S Manual

Share
Download
TATA Motors Punch 2021 Owner'S Manual Download Page 55

 

 

Distance To Empty (DTE) 

 

The above DTE screen indicates an ap-
proximate distance in ‘km’ that your vehi-
cle can travel with available fuel in tank. 

To reach the Distance to Empty in the In-

strument cluster. Press the 

  but-

tons on RHS of the steering wheel. 

DTE values may vary significantly based 
on driving conditions, driving habits, and 
condition of the vehicle. It is an estimate 
value of the available driving distance. 

If low fuel warning light glows, fill the fuel 
tank immediately regardless of the DTE 
figure. 

 

 

Infotainment Information On Instru-
ment Cluster Display Unit 

 

The instrument cluster will display informa-
tion like media, navigation and FM. 

Setting Screen 

 

User can enter into setting by pressing se-

lect button 

 while being in setting 

screen. 

 NOTE

Average Fuel Economy, Trip time and 
Average speed will get reset to ‘0’ when 
Battery is removed and refitted. 
Average Fuel Economy will be dis-
played as ‘—.—‘for initial 0.5 km of re-
spective trip. Once 0.5 km distance is 
covered, Average Fuel Economy will be 
displayed. 
Even after 0.5 km distance covered for 
particular trip, if Average Fuel Economy 
is displayed as ‘—.—‘, then take your 
vehicle to TATA MOTORS Authorized 
Dealer/Service Center.

 NOTE

If DTE is displayed as ‘—-‘, then 

•

take your vehicle to the TATA MO-
TORS Authorized Dealer/Service 
Center. 

The DTE will update with a new 

•

value when fuel is added for more 
than 7 litres at a time.

DASHBOARD AND FEATURES

47

Summary of Contents for Punch 2021















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands