
154
Lifting the front wheel using jack
Lifting the rear wheel using jack
Remove wheel nuts with the help of wheel
spanner and take out flat tyre.
Roll the spare wheel into position and align
the holes in the wheel studs.
Tighten each nut by hand until the wheel
is securely seated on the hub.
Lower the jack completely then tighten the
wheel nuts one by one using wheel span-
ner.
Press fit the wheel cover back (if applica-
ble).
Restore all the tools and jack at their re-
spective locations.
Place the flat tyre at spare wheel location
NOTE
Do not place wheel nuts in sand or on a
dirty surface. Do not apply oil or grease
on it.
NOTE
Do a check and correct the tyre
•
pressure and wheel nuts tightness
of the changed wheel at nearest au-
thorised service station. Get the flat
tyre repaired at the earliest.
Place the jack only at recommended
•
jacking locations.
Do not put Jack under any part of
•
Rear Axle.
EMERGENCY AND BREAKDOWN ASSISTANCE
Summary of Contents for Punch 2021
