TATA Motors Punch 2021 Owner'S Manual Download Page 224

Page: 224 / 238

216

VEHICLE EXTERIOR ENRICHMENT

Why Vehicles are Painted?

For Corrosion protection of the metal surfaces.

•

Ease of application from other corrosion protection treatments.

•

Cheaper than other corrosion protection methods eg. Galvanizing, anodizing.

•

For decoration and identification.

•

Various Environmental Hazards Affecting Paints

Environmental hazards: destroys your vehicle’s finish.

Even as your new vehicle rolls off the assembly line, the paint is not protected.

The Enemy

Ultraviolet rays, pollution, tree sap, bird droppings, car wash chemicals, road salt and acid rain.

Benefits

Vehicle Exterior Enrichment

Removal of medium scratches, orange peel, oxidation, dust nibs etc. & swirl marks from painted surface.

•

Restoration of original gloss levels, UV protection after gloss is restored.

•

Cleaning & dressing of tyres, Bumpers and all exterior plastic moldings/trims.

•

TATA MOTORS has tied up with

M/s Autokrom

M/s 3M & M/s Wurth

for this world class treatment at affordable prices.

This treatment is available in all authorized workshops. The Dealer Service Marketing Executive will explain to you the bene-fits and
terms and conditions of this treatment.

VEHICLE CARE AND VALUE ADDED SERVICES

Summary of Contents for Punch 2021















































































































































































































































Search results

Summary of Contents for Punch 2021

Reviews:

Brands by name

Popular brands

TATA Motors Punch 2021, Owner'S Manual

Search results

Summary of Contents for Punch 2021

Reviews:

Brands by name

Popular brands