manualshive.com logo in svg

TATA Motors Punch 2021, Owner'S Manual

Share
Download
TATA Motors Punch 2021 Owner'S Manual Download Page 194

186

Keep the correct pressure in the tyres for 
the best combination of riding comfort, 
handling, tyre life and optimum perform-
ance. 

Over inflation of tyres makes the vehicle 
ride bumpy and harsh. Tyres are more 
prone to uneven wear and damage from 
road hazards. 

Under inflated tyres reduce comfort, af-
fects handling and increases the operating 
temperature, which can result in failure. 
They also cause uneven wear and bring 
down the performance of the car. 

 

 

Recommended Tyre Pressures 

 

 

 

Tyre Pressure Sticker Location 

 

Tyre Rotation 

To increase tyre life rotate the tyre at spec-
ified intervals or earlier depending on the 
operation of vehicle. The illustrations 
shows how to rotate tyres. 

 NOTE

Every time you check inflation pressure, 
you should also examine tyres for un-
even wear, damage and trapping of for-
eign objects in the treads and wear.

Tyre Size

Front 

(psi/bar)

Rear 

(psi/bar)

185/70 R15 

89H

32 psi (2.2 bar)

195/60 R16 

89H

 NOTE

This is for reference. Kindly refer Tyre 
pressure as indicated on tyre pressure 
sticker provided on vehicle.

MAINTENANCE

Summary of Contents for Punch 2021















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands