TATA Motors Punch 2021 Owner'S Manual Download Page 134

Page: 134 / 238

126

Auto Mode

Auto mode will be engaged only when ve-
hicle is stationary and brake pedal
pressed. An audio signal indicates when

Automatic gear is engaged.

will be in-

dicated in instrument cluster.

Gear Upshift and Downshift will be done
automatically while driving.

Manual Mode

Shift gear lever to left for engaging manual
mode. An audio signal indicates when

manual mode is engaged.

will be in-

dicated in instrument cluster.

In manual mode, driver should select the
desired gear by shifting lever to,

Upshift the gears.

Downshift the gears.

Push the gearshift lever to the

‘+’

direction

and release it. Every time the lever is op-
erated, upshifting takes place 1 step in the
order of 1

> 2

> 3

> 4

> 5

gear.

Pull the gearshift lever to the

‘–’

direction

and release it. Every time the lever is op-
erated, downshifting takes place in the
order 5

> 4

> 3

> 2

> 1

gear.

In manual mode, gears are not shifted au-
tomatically unless the engine RPM thresh-
old is reached.

Creeping Feature

Creeping function allows the car move-
ment without accelerator Pedal pressed
when the brake pedal is released.

NOTE

Down shifting of gear occurs automati-
cally while braking/engine rpm reduc-
tion.

STARTING AND DRIVING

Summary of Contents for Punch 2021















































































































































































































































Search results

Summary of Contents for Punch 2021

Reviews:

Brands by name

Popular brands

TATA Motors Punch 2021, Owner'S Manual

Search results

Summary of Contents for Punch 2021

Reviews:

Brands by name

Popular brands