manualshive.com logo in svg

TATA Motors Punch 2021, Owner'S Manual

Share
Download
TATA Motors Punch 2021 Owner'S Manual Download Page 111

 

 

Use recirculation mode for faster heating 
and cooling. However, keeping the system 
in recirculation mode - particularly when 
the AC is in OFF - can cause fogging of 
windows. 

 

 

10. “OFF” Button 

 

 

Press the OFF button to switch 
the system ‘OFF’. OFF will be 
displayed on the infotainment 
screen. 

Hvac Sensors 

HVAC system is fitted with three sensors 

A solar sensor on windshield glass at 

1.

the top center. 

 

In-car sensor on HVAC control panel. 

2.

 

Outside Ambient Temperature (OAT) 

3.

sensor located under the front bumper 
grill. 

 

 NOTE

The outside air intakes for the climate 
control systems are at the base of wind-
screen. Keep this area clear from 
leaves and other debris.

 NOTE

When reverse gear is selected, air inlet 
may switch to recirculation mode if it is 
in fresh air mode, to prevent exhaust 
fumes from entering the cabin.

 NOTE

Do not cover or spill any liquid on 

•

sensors. 

Do not cover sensor, this may cause 

•

the sensor to malfunction. This may 
lead to FATC not functioning to de-
sired level.

CLIMATE CONTROL

103

Summary of Contents for Punch 2021















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands