manualshive.com logo in svg

TATA Motors Punch 2021, Owner'S Manual

Share
Download
TATA Motors Punch 2021 Owner'S Manual Download Page 35

SMART KEY (if available) 

 

Keep the smart key with user to perform 
the passive access. It is used for locking, 
unlocking and starting the vehicle. 

Locking all doors 

1.

Approach Light 

2.

Tail gate opening 

3.

Unlocking all doors

4.

 

Locking All Doors 

Press the lock button once (1) to lock all 
the doors of the vehicle. 

Successful lock will be indicated by two 
flashes of turn signal indicators. 

Approach Light 

This feature helps to find and reach the 
parked vehicle. 

When you press approach light button (2) 
once, position lamps or low beam and po-
sition lamps will turn ‘ON’. 

To switch ‘OFF’ the approach lights, press 
and release the same button or it automat-
ically turns ‘OFF’ after certain time. 

Tail Gate Opening 

Press the tail gate opening button once (3) 
to unlock the tailgate.

 

Unlocking All Doors 

Press the unlock button once (4) to unlock 
all the doors. 

Successful unlock will be indicated by one 
flashes of turn signal indicators. 

 

 

 NOTE

If smart key battery is low/drained or ve-
hicle battery is low/drained, user can 
unlock and enter into vehicle by using 
mechanical key blade, which is present 
inside the smart key.

OPENING AND CLOSING

27

Summary of Contents for Punch 2021















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands