TANDBERG SLR7, Reference Manual, Page: 106 / 118

Tandberg Data Selftest and Diagnostics
___________________________________________________________________________
10-18 Tandberg SLR Reference Manual
The pass criteria for the Read/Write test is as follows:
Medium Type Parameter Pass Criteria
SLRtape140 Hard Write Errors None
SLRtape100 Hard Read Errors None
SLRtape75 Hard Servo Errors None
SLRtape60 Soft Write Errors < 10% per Ch.
Raw Read Error Rate < 4.0% per Ch.
Soft Servo Errors TBD
SLRtape50 Hard Write Errors None
Hard Read Errors None
Hard Servo Errors None
Soft Write Errors < 2.4% per Ch.
Raw Read Error Rate < 1.0% per Ch.
Soft Servo Errors TBD
SLR32 Hard Write Errors None
SLRtape24 Hard Read Errors None
Hard Servo Errors None
Soft Write Errors < 2.0% per Ch.
Raw Read Error Rate < 1.0% per Ch.
Soft Servo Errors TBD
SLRtape7 Hard Write Errors None
Hard Read Errors None
Hard Servo Errors None
Soft Write Errors < 5.0%
Raw Read Error Rate < 0.8%
SLR5 Hard Write Errors None
DC9250 Hard Read Errors None
Hard Servo Errors None
Soft Write Errors < 1.0%
Raw Read Error Rate < 0.2%
Table 10-7: Pass Criteria for Read/Write Test
When the Read/Write test has completed the tape is repartitioned back to a single partition (if
servo based media).