manualshive.com logo in svg

TANDBERG Codec 3000 MXP, Reference Manual

Share
Download
TANDBERG Codec 3000 MXP Reference Manual Download Page 59

59

D 13887.08
MAY 2008

TANDBERG 3000 

MXP 

&

 

6000 

MXP

 REFERENCE GUIDE FOR SYSTEM INTEGRATORS

A command of great importance,

 xpreferences

 lets the 

user/control application individually configure the Telnet/
RS 232 session in use. When parsing data sent from the co-
dec using a control system it is important to set preferences 
to match the parser in use.
The xpreferences is a session specific command, i.e. 
different RS 232/Telnet sessions can define preferences 
individually. This also implies that the preferences must be 
set each time the control application connects to the codec, 
i.e. the control application should always set the necessary 
preferences when connecting to the system (or after system 
reboot when using RS 232).

The xpreferences Options

xpreferences ?

usage: xpreferences xpathwrite <on/off>

or:    xpreferences detaillevel <1..2>

or:    xpreferences xmlconfigfeedback <on/off>

or:    xpreferences xmlstatusfeedback <on/off>

or:    xpreferences xmlcommandresult <on/off>

or:    xpreferences itemnumber <on/off>

or:    xpreferences completepath <on/off>

OK

XACLI – Special Commands – xpreferences (I)

About the TANDBERG API

About 

xpreferences

xpreferences xpathwrite

xpreferences xpathwrite <on/off>

Disables/enables the XPath search engine when issuing con-
figurations. When the XPath search engine is disabled, the 
user/control application must supply the complete path to 
the configurations to be set (no “double slashes” allowed). 
This will improve the performance of the system when issu-
ing many consecutive configurations.

NOTE!

 It is always recommended to supply the complete 

path for configurations to be set when issuing commands 
from an external control application.

xpreferences detaillevel

xpreferences detaillevel <1..2>

Most information elements accessible by the status-type 
commands are defined to be level 1 information. However 
there are some information elements defined to be level 2 
information. When reading status information, only the infor-
mation elements with a detail level equal to or less than the 
detaillevel defined for the interface will be listed.
The detaillevel is by default set to 1 when connecting to an 
RS 232/Telnet session.

xpreferences xmlconfigfeedback <on/off>

If  xmlconfigfeedback is set to on, feedback on configura-
tions will be returned in XML-format instead of the standard 
XACLI configuration format.

EXAMPLE

XACLI-format:

*c xConfiguration SerialPort 1 BaudRate: 2400

XML format

<Configuration>

  <SerialPort item=”1”>

    <BaudRate item=”1”>2400</BaudRate>

  </SerialPort>

</Configuration>

xpreferences xmlconfigfeedback

xpreferences xmlcommandresult <on/off>

If xmlcommandresult is set to on, response for commands 
will be returned in XML-format.

EXAMPLE

XACLI-format:

xcom dial 10.47.15.127

*r Result (status=OK):

     CallRef: 1

     LogTag: 8

*r/end

XML format

xcom dial 10.47.15.127
<Result item=”1” status=”OK”>

  <CallRef item=”1”>1</CallRef>

  <LogTag item=”1”>8</LogTag>

</Result>

xpreferences xmlcommandresult

Summary of Contents for Codec 3000 MXP



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands