manualshive.com logo in svg

TANDBERG Codec 3000 MXP, Reference Manual

The TANDBERG Codec 3000 MXP is a cutting-edge video conferencing system designed for seamless collaboration. Enhance your communication experience with its advanced features and sleek design. Access the comprehensive Reference Manual for free download at manualshive.com, unlocking the full potential of this remarkable product.

Share
Download
background image

105

TANDBERG 3000 

MXP 

&

 

6000 

MXP

 REFERENCE GUIDE FOR SYSTEM INTEGRATORS

Configuration-type Commands – xconfiguration / configuration.xml

D 13887.08
MAY 2008

OSD

Icon

Warning: <On/Off>

Enables/Disables the Warning icon.

Example:

 xconfiguration osd icon warning: on

OSD

MCUStatusLine

Mode: <On/Off/Auto>

If set to 

On

 the MultiSite / MCU / DuoVideo indicators will be displayed and provide information about the conference.

If set to 

Off

 the MultiSite / MCU / DuoVideo indicators will not be displayed.

If set to 

Auto

 the MultiSite / MCU / DuoVideo indicators will be displayed for a few seconds and then timed out. When grabbing the remote control, the 

indicators will be shown again.

Example:

 xconfiguration osd mcustatusline mode: on

OSD

Offset

Mode: <On/Off>

Set Offset Mode to 

On

 to add extra margins for the on screen menu. If you experience problems viewing all text or buttons on the screen you can try to 

set Offset Mode to 

On

. This problem can occur on some 720p screens.

Example:

 xconfiguration osd offset mode: off

PictureProgram [1..4]

Layout: <Full/2Split/4Split/2+1Split/3+1Split/5+1Split>

Example:

 xconfiguration pictureprogram 1 layout: full

The Picture Programs are used 

to define custom picture layouts 

to be displayed locally.

PictureProgram [1..4]

Window [1..6]

Picture: <LocalMain/LocalDuo/Current/Previous/Duo/RemoteMain/RemoteDuo/JPEG/TandbergMonitor1/TandbergMoni

-

tor2/None>

Example:

 xconfiguration pictureprogram 1 window 2 picture: localmain

PictureProgram [1..4]

Window [1..6]

Call: <1..11>

Example:

 xconfiguration pictureprogram 1 window 2 call: 4

PresentationStart: <Manual/Auto>

If set to 

Auto

, the Dual Stream is started automatically when a presentation is initiated from the menu or directly from the remote control  

(requires that the system has Presenter option installed and the far end side also supports Dual Stream).
If set to 

Manual

, the Dual Stream must be started manually.

Example:

 xconfiguration presentationstart: auto

PacketlossDownSpeed

Mode: <Auto/Off>

If set to 

Auto

, the system will attempt to downspeed the video channel from the sender by sending flowcontrol messages if packet loss is encountered.

If set to 

Off

, the system will not request downspeeding based on packetloss.

Example:

 xconfiguration packetlossdownspeed mode: auto

OSD 

cont...

 — PacketLossDownspeed

Summary of Contents for Codec 3000 MXP



















































































































































































































































Reviews:

No comments

Related manuals for Codec 3000 MXP

Zenith Allegro Operating Manual & Warranty preview
Allegro
Brand: Zenith Pages: 24
DayTronic System 10 User Manual Book preview
System 10
Brand: DayTronic Pages: 414
Panasonic SC-PMX9DB Quick Manual preview
SC-PMX9DB
Brand: Panasonic Pages: 1
Panasonic SC-AKX18 Operating Instructions preview
SC-AKX18
Brand: Panasonic Pages: 2
Panasonic SC-PM02 Operating Instructions preview
SC-PM02
Brand: Panasonic Pages: 2
Panasonic SC-PMX90 Owner'S Manual preview
SC-PMX90
Brand: Panasonic Pages: 20
Magnavox FW650C/22 User Manual preview
FW650C/22
Brand: Magnavox Pages: 24
Daewoo AXL-128 Service Manual preview
AXL-128
Brand: Daewoo Pages: 27
Avaya B109 User Manual preview
B109
Brand: Avaya Pages: 21
Alpine KTX-TCMS-5 Installation Kit preview
KTX-TCMS-5
Brand: Alpine Pages: 8
Polycom HDX Desktop Systems Quick Start Manual preview
HDX Desktop Systems
Brand: Polycom Pages: 2
JL Audio Stealthbox SB-HY-VELOSTR/10TW3 Installation Manual preview
Stealthbox SB-HY-VELOSTR/10TW3
Brand: JL Audio Pages: 7
Nexus I/O Module Installation & Operation Manual preview
I/O Module
Brand: Nexus Pages: 97
ACC SmarTouch Digital User Manual preview
SmarTouch Digital
Brand: ACC Pages: 28
Blaupunkt MC CD 42e Instruction Manual preview
MC CD 42e
Brand: Blaupunkt Pages: 63
Raven DCS 410 Installation & Service Manual preview
DCS 410
Brand: Raven Pages: 43
Toshiba IPedge Installation Manual preview
IPedge
Brand: Toshiba Pages: 196
Toshiba VIPedge User Manual preview
VIPedge
Brand: Toshiba Pages: 214

Brands by name

Popular brands

Load more brands