3
D 13887.08
MAY 2008
TANDBERG 3000
MXP
&
6000
MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
What’s New in This Version?
Finding the Information You Need
There are a number of new and altered instructions available in
version F7.1
Configuration Commands
CallVideoSource: <0/1/5/6>
New in this version.
The Call Video Source is the default call
video source you would prefer to use in a call.
Conference PeriodicIntra: <0..1000>
New in this version.
Use this setting to generate a new intra
frame with a configurable interval. Use this setting with caution
since it in a normal network will decrease the video quality. The
default value is set to 0 which means off. If you configure it to
10 it will send an intra every 10th second.
Conference VideoText: <On/Off/Auto>
New in this version.
In MultiSite calls you can display the names
of the participants on screen. By setting the Video Text Time-out
setting, the system is configured to display the names for a
period of time or as long as you are connected.
Conference VideoTextTimeout: <0..30>
New in this version.
Sets the timer for the On-screen name
of participants in MultiSite calls. Set the timer to display the
names for a period of time or as long as you are connected.
CorporateDirectory Protocol: <HTTP/HTTPS>
New in this version.
TANDBERG MXP systems now support
secure management when communicating with the TMS
(TANDBERG Management Suite).
Directory CallLog: <On/Off>
New in this version.
Enable/disable Call Logs for Placed calls,
Missed calls and Received calls in the Phone Book.
DynamicResolution Mode <Auto/Off>
New in this version.
With Dynamic Resolution the system will
use the optimal video resolution for the chosen bandwidth. This
feature is only applicable to HD (high definition) calls.
If set to Auto and in a HD call: the resolution will differ between
the bandwidths 720p, 576p and 448p, dependent on how much
motion it is in the picture. The call will start with 720p and
change to a lower resolution when there is a lot motion. It will go
back to 720p with less motion.
If set to Off: Disables the Dynamic Resolution feature (the
default setting).
ExternalManager Protocol: <HTTP/HTTPS>
New in this version.
Enables/disables for secure management.
ExternalServices Protocol: <HTTP/HTTPS>
New in this version.
Enables/disables for secure management.
HTTPS VerifyServerCertificate: <On/Off
>
New in this version.
TANDBERG MXP systems now support
secure management when communicating with the TMS.
For more information see the TANDBERG White Paper “Imple-
menting Secure Management” which describes how to configure
secure HTTPS between TANDBERG products. To find the docu
-
ment, follow the link: http://www.tandberg.com/support/docu-
mentation.php and select White Papers.
Kiosk OneClickConnect: <On/Off>
New in this version.
If turned On, you can make a call with a
single click on the green call button on the remote control. The
system will call the first entry in “My Contacts” in the Phone
Book. NOTE: This functionality will only work in Kiosk Mode
If set to Off: Does not allow for one click connect in Kiosk mode.
MaxBandwidth: <128..10240>
New in this version.
Limit max bandwidth usage for the system.
Related to IPMedia MaxVideoTXRate, which only controls up-
stream bandwidth.
OSD CallDuration Mode: <On/Off>
New in this version.
The call duration can be displayed on
screen. The timer showing the duration of the call is displayed in
the bottom right corner of the screen.
OSD Menu IconPlacement: <Left/Right>
New in this version.
Applies to the following icon indicators:
Microphone Off, Volume Off, On Air, Encryption, Bad Network,
Telephone, Duo Video and Camera Tracking. Places the icons in
the top left corner or the top right corner of the screen.
OSD Menu Language: < English/German/Norwegian/French/
Swedish/Danish/Italian/Portuguese/Japanese/Chinese/Tradi-
tionalChinese/Russian/Spanish/Korean/Finnish/Thai/Arabic>
Altered in this version.
Added Danish menu language to the list.
SerialPort 1 Mode: <Control/Transparent/Direct>
Altered in this version.
Control: Gives access to the Command
Line Interface. Transparent: Enables transmission of text during
call on a line by line basis. Direct: Enables transmission on
binary data during call. NOTE! Only Serial Port 1.
SerialPort 1 Direct Buffer: <0..16384>
New in this version.
Specifies the size of the buffer used in di
-
rect mode. Try setting this value higher if you need a continuous
stream of data on the receiving end. Higher values introduces
more delay. NOTE! Only Serial Port 1.
SIP ReplyTo URI: <S: 0, 60>
New in this version.
If configured it is this URI that will be dis
-
played in the call lists.
SIP Server Type: <S: 0, 60>
Altered in this version.
Added Siemens to the list of SIP server
type. Must be used when registering to a Siemens HiPath 8000.
Video Inputs Source 5 HorizAdjust:
<0..255>
New in this version.
This gives you the possibility to adjust the
placement of the pc image on screen. Much like the setting you
find on a regular pc screen. NOTE! Only Video Input Source 5.
Video Outputs Animation <On/Off>
New in this version.
The new PiP/PoP animation makes the
windows fade or slide into position when changing the picture
layout. PiP means Picture in Picture layout and PoP means Pic-
ture outside Picture layout.
Configuration commands for TANDBERG Remote Control
Enable or disable keys, and using configuration instead of com
-
mands.
Key Number0: <On/Off>
New in this version.
Enables/disables the given key on the
TANDBERG Remote Control.