manualshive.com logo in svg

TANDBERG 6000 MXP Profile, User Manual

The TANDBERG 6000 MXP Profile is an advanced video conference system that revolutionizes remote communication. For a hassle-free setup, our Quick Start Manual provides step-by-step instructions on installation, troubleshooting, and system optimization. Download this comprehensive manual for free from our website, ensuring a smooth and seamless user experience.

Share
Download
background image

Peripheral Equipment 

251 

The DNAM Loudspeaker Cabinet (Center Speakers)*: 

ƒ

 

3-way Center Speaker system  

ƒ

 

Frequency range 50Hz - 20kHz 

ƒ

 

2 x 130mm low- and midrange loudspeakers, 8 ohms nominal, high quality 

ƒ

 

1 x 25mm dome tweeter, 6 ohms nominal, high quality 

ƒ

 

Crossover filtered audio signals received from DNAM amplifier 

ƒ

 

Long time max power 90 Watt on all loudspeakers 

ƒ

 

Enclosed MDF speaker cabinet 

 

 

Integrated Stereo Speakers**: 

ƒ

 

2 * 15W Stereo Speakers, high quality 

ƒ

 

Frequency range 100Hz - 20kHz 

ƒ

 

Enclosed MDF speaker cabinet 

 

Using the external and optional Stereo Speaker Kit will improve the stereo sound, even on 
systems with integrated stereo speakers**. Note that the kit is not available for Mini-DNAM 
described below. Before connecting the Stereo Speaker Kit, make sure the complete video 
communication system is powered down. When connecting the Stereo Speaker Kit to a system 
with already integrated stereo speakers, these integrated speakers will be disabled, and a new 
filter and specification setup is loaded when powering up the video communication system. 

Please refer to the section 

Stereo Speaker Kit

 for details. 

 
 

Summary of Contents for 6000 MXP Profile






















































































































































































































































































































































Reviews:

No comments

Related manuals for 6000 MXP Profile

Rane ECS Hardware Manual preview
ECS
Brand: Rane Pages: 14
Yamaha CBX-D5 Troubleshooting Manual preview
CBX-D5
Brand: Yamaha Pages: 4
Yealink MVC Series Quick Start Manual preview
MVC Series
Brand: Yealink Pages: 6
Yealink MeetingSpace VC800 Deployment Manual preview
MeetingSpace VC800
Brand: Yealink Pages: 6
Yealink MeetingEye 400 Quick Start Manual preview
MeetingEye 400
Brand: Yealink Pages: 16
Yealink One Talk CP960 Quick Manual preview
One Talk CP960
Brand: Yealink Pages: 4
Yealink One Talk CP960 Quick Start Manual preview
One Talk CP960
Brand: Yealink Pages: 20
Yealink VC400 Administrator'S Manual preview
VC400
Brand: Yealink Pages: 299
Yealink VC210 Teams Edition Quick Start Manual preview
VC210 Teams Edition
Brand: Yealink Pages: 12
Yealink CP860 SERIES Quick User Manual preview
CP860 SERIES
Brand: Yealink Pages: 5
Yealink VC400 Quick Start Manual preview
VC400
Brand: Yealink Pages: 16
Yealink MeetingBar A20 User Manual preview
MeetingBar A20
Brand: Yealink Pages: 30
Yealink MeetingSpace VC200 Quick Start Manual preview
MeetingSpace VC200
Brand: Yealink Pages: 8
Yealink MVC Series: MVC800 Quick Start Manual preview
MVC Series: MVC800
Brand: Yealink Pages: 16
Yealink CP930W Telesystem Quick Reference Manual preview
CP930W Telesystem
Brand: Yealink Pages: 2
Yealink VC110 Quick Start Manual preview
VC110
Brand: Yealink Pages: 16
Magnavox MME100 - Audio Micro System User Manual preview
MME100 - Audio Micro System
Brand: Magnavox Pages: 23
IBCcontrol MicroMax180 Manual preview
MicroMax180
Brand: IBCcontrol Pages: 16

Brands by name

Popular brands

Load more brands