TANDBERG 6000 MXP Profile User Manual Download Page 332

Page: 332 / 341

TANDBERG 6000 MXP

318

Bandwidth:

Decides the quality of the video call. High bandwidth gives high quality.

Call Control Data Triggered:

Uses TxData, RxData and clock signals only. Use Data Triggered

when no handshake signal is available.

Call control Leased Line:

Is a non-dialing protocol and should be used when two systems are

connected in a point-to-point connection. Use Leased Line when the handshaking signals
DTR and CD are available.

Call control Manual:

Should be used when no handshake signals are available, and the external

equipment requires a constantly connected line.

Call control RS366 Dialing:

The only dialing protocol and would normally be used together with

network clocking RS449/V35 Compatible when the external system uses RS2366 ports.

Call status:

Comprehensive information about the call listing transmitted and received

audio/video/data information.

Camera tracking:

Voice Activated Camera Positioning - the camera will automatically view the

current speaker.

Camera tracking mode:

Voice Activated Camera Positioning - the camera will automatically

view the current speaker.

Chair control:

Enables one participant to control the meeting by selecting which of the

conference participants that is to be broadcasted to the other participants.

Channel status:

Comprehensive information about the call progress listing the numbers called,

and if an error occurs a cause code is displayed.

CIF:

Common Intermediate Format, 352x288 pixels

Closed Captioning:

Text chat.

Codec:

The Codec is the heart of the system. The main task for the Codec is the compression of

outgoing video, audio and data, the transmission of this information to the far end, and
the decompression of the incoming information.

Continuous Presence:

See Split Screen

Control Panel:

The Control Panel is found in the Menu.

CSU:

Channel Service Unit

Daisy-chaining:

Use of several cameras in a video conference.

Dataport:

The system provides two standard RS 232 data ports to allow a computer to be

connected for data transfer and control purposes.

Dataport 1:

A standard RS 232 data port to allow a computer to be connected for data transfer

and control purposes.

Dataport 2:

Dedicated to the main camera and will not be available in standard configuration.

DES:

Encryption. (Data Encryption Standard)

DHCP:

Dynamic Host Configuration Protocol.

Summary of Contents for 6000 MXP Profile






















































































































































































































































































































































Search results

Summary of Contents for 6000 MXP Profile

Reviews:

Related manuals for 6000 MXP Profile

Brands by name

Popular brands

TANDBERG 6000 MXP Profile, User Manual

Search results

Summary of Contents for 6000 MXP Profile

Reviews:

Related manuals for 6000 MXP Profile

Brands by name

Popular brands