TANDBERG 6000 MXP Profile User Manual Download Page 264

Page: 264 / 341

TANDBERG 6000 MXP

250

TANDBERG 6000 MXP Profile DNAM configuration
Center Sp Integrated Stereo Speakers

The DNAM Amplifier*:

3 x 50W continuous average Center Output Power (load specified by DNAM Center
Speakers).

2 x 50W continuous average Stereo Output Power (load specified by TANDBERG
Loudspeaker Stereo Kit).

Full dynamic range for audio (high fidelity range)

Digital Signal Processing and Filtering on all channels for best audio detail clarity

Digital Crossover Filtering on center channels.

In/out:

Audio In - S/PDIF (stereo) or Analog (mono), using the same connector.

Differential In - (female XLR pinout: 1 - GND, 2 – Signal (+), 3 – Signal (-))

Loop Out - line out directly from the input, always analog even with S/PDIF in.

Stereo Out - (male XLR, common GND configuration)

Fuse 2A 250V Slow, 5 x 20mm, Littelfuse type 215002.

Summary of Contents for 6000 MXP Profile






















































































































































































































































































































































Search results

Summary of Contents for 6000 MXP Profile

Reviews:

Related manuals for 6000 MXP Profile

Brands by name

Popular brands

TANDBERG 6000 MXP Profile, User Manual

Search results

Summary of Contents for 6000 MXP Profile

Reviews:

Related manuals for 6000 MXP Profile

Brands by name

Popular brands