TANDBERG 6000 MXP Profile User Manual Download Page 147

Page: 147 / 341

General Use

133

5.1.10

Date and Time Settings

NTP IP

This is the NTP time server address from which the system can get updated time information.
See

IP Services

for more details.

Auto

The NTP IP will be provided by the DHCP server.

Manual

The NTP IP address is set manually.

IP Address

The IP Address for obtaining the date and time information.

Time Zone

Select the correct time zone for the location of your system.

Date Format

Choose between DD/MM/YY, MM/DD/YY, or YY/MM/DD as the desired date format.

Time Format

Select 12h or 24h time format.

Daylight Savings

Moves the time 1 hour ahead.

Off

Moves the time 1 hour back.

Summary of Contents for 6000 MXP Profile






















































































































































































































































































































































Search results

Summary of Contents for 6000 MXP Profile

Reviews:

Related manuals for 6000 MXP Profile

Brands by name

Popular brands

TANDBERG 6000 MXP Profile, User Manual

Search results

Summary of Contents for 6000 MXP Profile

Reviews:

Related manuals for 6000 MXP Profile

Brands by name

Popular brands