Operation and Maintenance
Powering
on the Sys tem
AUTOLOADER LTO3 – User Reference Manual Rev. 1.01
TANDBERG DATA
Page 3 1 of 79
If the autoloader detects that a cartridge is loaded when it first comes alive, the following status will be
displayed on the operator panel:
Drive loaded
12345 -78 SEQ
In this example, there is no cartridge in slot 6. Inventory status will be displayed as an 8-character
string, with 4 blank spaces on each side.
Inventory status characters
Current Drive Status/Activity
Drive loaded
Inventory Status
12!45-78 SEQ
The inventory status characters will be represented as follows:
Character
Meaning
1 … 8
Slot Full – uses the slot numbers 1 to 8
–
Slot Empty – a dash is displayed as place holder
1/(0xff)
A cartridge that is being loaded, unloaded, imported, exported, or is loaded
in the drive, will be represented by the slot number alternating with the block
(0xff) character. The alternating rate should be approximately 1-second per
cycle, 50% duty cycle.
!
A cartridge that has been identified as faulty (and Media Attention LED is on)
will be represented by an exclamation point. An invalid cartridge will be
identified the same way.
Table 5
Inventory Status characters
LEDs
Figure 18
LEDs
