Installation and Setup
Installing the
Optional Bar Code Reader (BCR)
AUTOLOADER LTO3 – User Reference Manual Rev. 1.01
TANDBERG DATA
Page 2 1 of 79
Figure 8
Location of the protective coveri ng for the RMU rail
3. Align the LAN card in the rails and insert into the unit.
4. Fix the unit with the supplied screw (see Figure 9 ).
Figure 9
Positioning of the LAN card
5. Attach the Ethernet cable to the RMU and HOST system.
6. Power ON the autoloader and wait for initialization to complete.
7. Configure the RMU via OCP, see ThinStor
®
Plus LTO3 Autoloader – Operator's Manual.
7.2 Installing the Optional Bar Code Reader (BCR)
7.2.1 Contents of the Kit:
n
Barcode reader.
7.2.2 Required Tools:
n
Flat -blade screwdriver; small.
Formatiert:
Nummerierung und
Aufzählungszeichen
