Installation and Setup
Installing the
Optional Remote Management Unit (RMU)
AUTOLOADER LTO3 – User Reference Manual Rev. 1.01
TANDBERG DATA
Page 2 0 of 79
7 Installation and Setup
This chapter describes:
n
Installing the Optional Remote Management Unit (RMU)
n
Installing the Optional Bar Code Reader (BCR)
n
Installing the Autoloader as a Desktop Unit
n
Installing the Autoloader in a Rack
n
Running Library Verify Test
n
Connecting the Autoloader to the Server
7.1 Installing the Optional Remote Management Unit
(RMU)
7.1.1 Contents of the Kit:
n
LAN Card.
7.1.2 Required Tools:
n
T10 Torx wrench or small flat -blade screwdriver.
7.1.3 Mounting Instructions:
CAUTION
Electro static discharge!
Destruction of the ESD sensitive components.
Please touch unit cover or rear panel before installing the RMU.
The LAN card is to be mounted on the rear of the device.
1. Power off the autoloader.
2. Remove the protective covering (located on the autoloader’s rear panel) (see Figure 8 ).
Save the
screw.
Formatiert:
Nummerierung und
Aufzählungszeichen
