Tanaka AD-6, Instruction Manual

Page: 35 / 45

- 34 -
10.3 Fire Containment Shutter
Press the manual shutter switch once ((15) in Fig. 1 on Page 11) to confirm operation as if
the thermofuse has been blown.
After confirming normal operation, press the switch again, lift the shutter and secure using
the shutter hook.
10.4 Error Status and Fault
If an error occurs in the last test, or an operational error or equipment fault occurs, details
are displayed and printed, the buzzer sounds for 10 seconds, and tests are interrupted and
prevented from starting. Check the cause of the error and contact one of the authorized
Tanaka distributors listed at the end of this manual.
If problems occur during testing, data indicating the cause of the problem is printed. Press
the RESET key to return to the STANDBY screen.
Example of Error Display
TROUBLE
NO RECEIVER ! ! <- Trouble description
REC 0.0 % DIST 25.0
o
C
ROOM 25.0
o
C BATH 1.0
o
C
HEAT 25.0
o
C D.P 0.0
Example of Error Print
TROUBLE
DATE
2 / 8 / 20 11 : 30 : 00
NO RECEIVER ! ! <-Trouble contents
VOL 0.0% DIST 25.0
°
C
REC 25.0
°
C BATH 1.0
°
C
HEAT 25.0
°
C D.P 0.0