- 17 -
3 Routine Daily Inspection
The following should be checked routinely before using the tester:
Table 1: Checklist
Item Description
Appearance
Electrical connections
(Before turning the
main power on…)
Operation of each
component
·
The tester has no apparent damage.
·
The power cable is not damaged.
·
The power plug is fully inserted into the outlet.
·
The grounding cable is properly connected (only
applicable if using the ground adapter)
·
The circulating solution is filled to the specified level.
< After turning the main power on…>
·
The display appears to be functioning correctly
·
The circulating solution is circulating normally.
·
Each key functions normally when pressed.
·
The condenser bath and receiver compartment are at
the set temperatures.
·
Fire containment shutter closes correctly by pressing
Manual Fire Containment Shutter Activator. (See 10.3
on page 33)
!
Warning: Do not attempt to repair the tester yourself. In the event
that the tester exhibits any abnormal behavior
whatsoever, contact Tanaka Scientific Limited or an
authorized distributor.
Summary of Contents for AD-6
Page 2: ...1 Blank Page...
Page 9: ...8 Blank Page...
