Tanaka AD-6, Instruction Manual

Page: 6 / 45

- 5 -
Failure to adhere to the above precautions may result
in electric shock, damage to the tester, cords and/or
cables, and/or fire due to overheating.
!
Warning: Ensure that supply voltage meets the specifications of
the product.
Do not turn the power on until all electric connections
are secured.
Incorrect power supply specifications or loose electric
connections may damage the tester and result in
electric shock and/or other electrical accidents.
!
Warning: Ensure all ground wires are securely grounded.
Loose or disconnected ground wires may result in
electric shock.
Never connect the ground wires to gas pipes.
Doing so may result in a fire or explosion.
Ground wires may be connected to one of the
following:
·
Ground terminal of a power outlet
·
Copper bar buried 65cm or more underground
·
Water pipes as authorized by your local water
bureau as a grounding object
Handling Precautions
!
Warning: Be sure to confirm test configuration prior to every test.
Testing using incorrect parameters or with no boiling
chips may cause a sample to bump and catch fire.
!
Warning: Never touch the flask with bare hands after testing.
The danger of burns exists, even after cooling.
!
Warning: Never discard hot samples.
If a hot sample is discarded into a container containing
low flash point waste oil, a fire or explosion may result.